18 Cleaning Supply Organization Ideas for Quick Access

This site contains affiliate links, view the disclosure for more information.

Under-sink cabinets are among the most disorganized spaces in most homes. Bottles tip over, spray nozzles tangle, and items get pushed to the back where they are rarely retrieved. Plumbing pipes, disposal units, and angled drain lines reduce usable floor space significantly.

Cleaning supply organization requires more than one solution because cabinet sizes, plumbing configurations, and supply quantities vary by household. A single tension rod works in a shallow cabinet but fails in a deeper one. A stackable bin system suits a large laundry room but overwhelms a bathroom vanity.

This guide covers 18 practical methods across six storage categories: vertical systems, stackable containers, pull-out organizers, door-mounted storage, small-cabinet solutions, and plumbing obstacle solutions. Each method applies to specific cabinet dimensions, product types, or supply volumes.

Vertical Storage Systems for Cleaning Supplies

Tension Rods for Spray Bottles

Tension rods suspend spray bottles by their trigger handles. One rod can hold four to six standard spray bottles depending on handle width. Rods install without tools and fit cabinets between 12 and 36 inches wide.

• Works with cabinets 10–36 inches wide
• Holds bottles weighing up to 2 lbs each
• Requires at least 8 inches of vertical clearance above the rod

A single rod does not work for bottles without trigger handles. Round or pump-top bottles require a different solution.

Stackable Shelf Risers

Shelf risers add a second level inside a flat-bottomed cabinet. They create upper and lower storage zones without permanent installation. Most risers support short, wide containers rather than tall bottles.

Risers typically hold up to 15 lbs per tier. They are not compatible with cabinets that have center drain pipes running vertically through the floor space.

Over-the-Door Shoe Organizers

Clear pocket organizers hang over cabinet doors and hold small cleaning products. Each pocket fits bottles up to 3 inches in diameter. Full organizers can carry 20 or more items when fully loaded.

Do not exceed the weight limit printed on the organizer hardware, typically 5–10 lbs total. Over-door organizers require at least 1.5 inches of clearance between the door and cabinet frame to hang flat.

Also Read: 18 Pantry Storage Ideas for Narrow Spaces That Feel Small

Stackable Container Organization for Cleaning Products

Rectangular Bins with Dividers

Rectangular bins with interior dividers group products by type. Sponges, scrub pads, and small brushes stay separated from liquid containers. Bins with handles allow full removal for access to rear items.

• Standard sizes: 6×9 inches, 8×11 inches, 11×14 inches
• Most hold 4–6 lbs of contents
• Dividers are typically removable

Bins without handles are difficult to retrieve from deep cabinets. Fixed dividers limit flexibility when product sizes change.

Clear Acrylic Caddies

Cleaning supply organization benefits from clear containers because product labels remain visible without moving anything. Acrylic caddies are available in single-compartment and multi-compartment versions. They wipe clean with a damp cloth.

Acrylic cracks under heavy loads or sharp impacts. These caddies are best used for lightweight items such as sponges, gloves, and small spray bottles.

Lidded Stackable Totes

Lidded totes allow vertical stacking up to three units high in standard cabinets. Each tote holds a category of supplies such as bathroom cleaners, floor care products, or glass cleaners. Lids prevent dust accumulation on stored items.

Stacked totes require at least 30 inches of vertical clearance for a three-tier configuration. Access to the bottom tote requires removing the totes above it.

Pull-Out Organizers for Under-Sink Cabinets

Sliding Cabinet Drawers

Sliding drawers mount to the cabinet floor and extend outward when opened. They eliminate the need to reach to the back of a cabinet. Most under-sink sliding drawers are available in full-extension and three-quarter-extension versions.

• Full-extension drawers provide complete access to contents
• Three-quarter models cost less but leave rear space unreachable
• Weight capacity typically ranges from 15–35 lbs per drawer

Sliding drawers require a flat, unobstructed cabinet floor for mounting. Cabinets with center drain pipes may only accommodate side-mounted single drawers.

Two-Tier Pull-Out Organizers

Two-tier pull-out units add upper and lower trays on a single sliding frame. The upper tray holds shorter items while the lower accommodates taller bottles. These units typically measure 10–14 inches wide and fit on either side of a center drain pipe.

Installation requires drilling into the cabinet floor. Use appropriate fasteners for the cabinet material; particleboard requires coarse-thread screws, not standard wood screws.

Read More:

• 21 Ways to Organize a Small Kitchen on a Budget
• How to Organize Kitchen Drawers Without Dividers
• 15 Under-Sink Organization Tips for Pipes That Block Storage

Turntables

Turntables allow 360-degree rotation to bring rear items forward. A 12-inch turntable fits most under-sink cabinets. Two-tier turntables hold more product but reduce the total diameter that fits around plumbing.

Single-tier turntables work around p-traps and disposal units more easily than stacked versions. Items taller than 12 inches may tip when the turntable rotates.

Door-Mounted Cleaning Supply Organization

Over-Cabinet-Door Racks

Over-door racks mount on the inside face of the cabinet door and hold bottles, rolls, or small tools. Wire racks hold spray bottles upright. Solid-back racks with lips prevent items from sliding during door movement.

• Wire spacing must be narrower than the bottle base diameter to prevent tipping
• Maximum load typically 8–12 lbs
• Racks over 6 inches deep may prevent the door from closing fully

Measure door-to-shelf clearance before purchasing. A rack that extends more than the available clearance will prevent the door from closing.

Magnetic Door Strips

Magnetic strips adhere to the inside of cabinet doors and hold metal tools such as small scissors, can openers, and utility knives. They are not suitable for plastic or glass containers. Magnetic strips work primarily in cleaning supply organization for tool storage, not product storage.

Keep magnetic strips away from digital thermometers, electronic timers, or any battery-operated devices stored in the same cabinet. Adhesive-backed strips may not bond permanently to painted or textured cabinet interiors.

Pegboard Door Panels

Pegboard cut to cabinet door size accepts hooks, baskets, and small shelves. It is a flexible system that reconfigures as supply inventories change. Pegboard panels attach to the door with standoffs to allow hook insertion.

Pegboard panels add approximately 1 inch of thickness to the door interior. This reduces available clearance between the door and cabinet shelves by the same amount.

Small-Cabinet Solutions for Cleaning Supplies

Narrow Pull-Out Towers

Pull-out towers designed for spaces 3–6 inches wide fit in gaps between appliances or alongside vanities. They hold vertically arranged bottles in tiered shelves. These towers work for laundry rooms and bathroom cabinets more often than kitchen under-sink areas.

Most narrow towers require a minimum floor clearance of 60–72 inches of height to install. They are freestanding units, not mounted, and can tip if overloaded on upper shelves.

Countertop Caddies

Countertop caddies hold frequently used cleaning supplies at point of use. A caddy near the kitchen sink holds dish soap, scrub brushes, and sponges. Caddies with drainage holes prevent water from pooling at the base.

• Typically hold 4–6 items
• Available in stainless steel, plastic, and silicone
• Stainless versions resist rust longer than painted steel models

Caddies occupy counter space permanently. They are not practical in kitchens with limited countertop area.

Wall-Mounted Dispensers

Wall-mounted dispensers hold liquid soap, dish detergent, or all-purpose spray refills. They attach to the wall with screws or adhesive strips. Adhesive versions support up to 5 lbs and are not recommended for heavy glass dispensers.

Dispensers require access to the wall surface, which limits their use to open areas rather than inside cabinets.

Read More: 7 Deep Drawer Organization Ideas to Reduce clutter

Plumbing Obstacle Solutions for Cleaning Supply Organization

Adjustable Cabinet Organizers with Cutouts

Some under-sink organizers are manufactured with pre-cut or adjustable sections that route around p-traps and disposal units. These organizers maintain usable shelf space on both sides of the plumbing. Adjustable models use modular panels that reconfigure to fit different pipe positions.

Cleaning supply organization in cabinets with garbage disposals typically requires organizers with cutouts on the left side, where disposals are most commonly installed. Verify the disposal position before purchasing an organizer with a fixed cutout.

Side-Mount Hanging Baskets

Hanging baskets attach to the inside walls of a cabinet using adhesive strips or screws. They position storage above the cabinet floor, bypassing plumbing obstacles entirely. Wire baskets allow visual access to contents from above.

• Maximum weight: 3–5 lbs per basket for adhesive mounting
• Screw-mounted baskets hold up to 10 lbs
• Interior cabinet walls must be at least 0.5 inches thick for screw installation

Do not mount baskets directly above or adjacent to supply lines without confirming pipe clearance. Contact with sharp basket edges can wear through flexible supply line hoses over time.

Freestanding Rolling Carts

Rolling carts sit beside or near the cleaning area rather than inside a cabinet. They hold more supply volume than most cabinet organizers. Carts with locking casters stay in position during use.

Standard utility carts measure 12–18 inches wide and 24–36 inches tall. They require open floor space that may not be available in small bathrooms or galley kitchens. Carts are not compatible with under-sink cabinet storage due to height constraints.

Most under-sink organizers are rated for cabinet floors made of plywood or solid wood. Particleboard floors, common in builder-grade cabinets, may not hold screw-mounted hardware at the rated weight capacity.

For more helpful tips, check out our organization section.